0136 ブースター〔ポケモン折り紙〕ブースターの作り方/みるかなた

Basic Folding

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to line up with the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold gently from both sides together.
8 Let the paper naturally fold along the creases to form the shape of 9.
9 A basic square is created.

{Enlarge image}
10 Change the top and bottom positions.
With the opening facing downwards, fold the bottom left and right edges to meet the crease in the middle.
11 Make a crease and return.
12 Fold the top at the point where the crease made in 11 intersects with the top left and right edges.
13 Make a crease and return.
14 While opening the front paper upwards, fold the left and right edges inward along the crease made in 11.
15
16
{Flip}
17 Make creases on this side in the same way as 10 and 11.
18 Fold in the same way as 14, 15 and 16 to form 19 and 20.
19
20 The basic fold is complete.

Flareon’s head

1 Fold the paper to the shape of the 20th basic fold, then change the top and bottom positions. Fold the front paper upwards while opening it in the center.
2
{Flip}
3
4 Separately from 3, prepare a quarter-size piece of light green paper for the bangs and make a crease.
5
6
7
8 Insert it into 3.
9
{Flip}
10 Fold the left and right pieces of paper inwards along the creases, and fold the top front piece downwards.

11
12 Fold the front paper upwards at the corner of the mountain at the back.
13
{Flip}
14 Fold it upwards at the same position as the back paper.
15
16
17
{Flip}
18 Make the bangs. First, decide where to fold.
19
20
21
22 The folding position for the bangs is decided. Make sure to crease the paper firmly and unfold the paper that was folded in 21.

23 Make cuts with scissors.
24　
25
26
27
28
29 The bangs are done. Open the front paper downwards to make the ears.
30 Fold the top left and right pieces of paper diagonally from 7-8 mm above the base to 1-2 mm below the top edge of the back paper.
31 Fold upwards to the angle of the ears you want to make.
32 The ears are done. Fold the paper that was opened downwards in step 29 back up.
33 The Flareon’s head is done.

Flareon body

0 Place the vermilion paper on the outside and the light green paper on the inside, aligning the white backs of the papers, and fold both together. At first, folding two sheets together is difficult, so try folding one sheet first to get the hang of it before folding two sheets together.
1
2
3 Because the folding distance is long, the paper is prone to shifting, so use a ruler to keep it in place while folding.
{Flip}
4 Fold at the same position as the back sheet.
5 Make a crease, then unfold the folded paper completely.
6
7 Fold upwards at a position 18 mm above the bottom edge.
8
{Flip}
9 Fold along the creases made in steps 2 and 4.

10 Make the legs.
11
12
{Enlarge the diagram}
13 Fold the other side in the same way.
14
15
16

17
{Flip}
18
19
20 The Flareon’s body is complete.
21 Attach the Flareon’s head to the body from step 20 with double-sided tape. The Flareon is complete.