0001 フシギダネ〔ポケモン折り紙〕フシギダネの作り方/みるかなた

Basic Folding

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to line up with the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold gently from both sides together.
8 Let the paper naturally fold along the creases to form the shape of 9.
9 A basic square is created.

{Enlarge image}
10 Change the top and bottom positions.
With the opening facing downwards, fold the bottom left and right edges to meet the crease in the middle.
11 Make a crease and return.
12 Fold the top at the point where the crease made in 11 intersects with the top left and right edges.
13 Make a crease and return.
14 While opening the front paper upwards, fold the left and right edges inward along the crease made in 11.
15
16
{Flip}
17 Make creases on this side in the same way as 10 and 11.
18 Fold in the same way as 14, 15 and 16 to form 19 and 20.
19
20 The basic fold is complete.

Bulbasaur’s Body

1 Fold it up to the basic 20 shape, then change the top and bottom positions.
Fold the front piece of paper up slightly (about 2 mm) above the corner of the mountain at the back of the bottom piece of paper.
2 Make a mark at the tip of the front piece of paper and return it to its original position.
3 While opening the bottom front piece of paper to the left and right at the crease made in step 1, fold it up to match the tip mark made in step 2.
4 Fold each of the left and right corners of the bottom edge slightly diagonally upwards.
5 Fold the bottom front piece of paper up at the base.
6 The face and ears are made.
7 Make the feet. Fold the top left and right pieces of paper diagonally at the base, passing them between the front and back pieces of paper, and then fold them diagonally downwards.

8 Fold the tip of the paper in half and fold it between the pieces of paper.
9 The legs are finished.
Fold the bottom piece of paper up halfway from the base.
10
11
12
{Flip}
13 The body is finished.
Attach a seed to the back piece of paper that is sticking out a little.

Bulbasaur Seed

1 Fold it up to the 20th basic fold and change the top and bottom positions.
Fold the front piece of paper up just above the corner of the mountain at the back of the bottom piece of paper.
2 Fold the tip of the paper diagonally downwards.
3
{Flip}
4 Fold the front piece of paper up just above the corner of the mountain at the back of the bottom piece of paper.
5
6
7

{Flip}
8 Fold the top left and right pieces of paper down, lining up with the outer diagonal edges below the top edge of the back piece of paper.
9 Fold diagonally upwards.
10
11 The Bulbasaur seed is complete.
12 Attach seed 11 to the Bulbasaur’s body with double-sided tape.
The Bulbasaur is complete.