0006 リザードン01〔ポケモン折り紙〕リザードン01の作り方/みるかなた

Basic Folding

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to line up with the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold gently from both sides together.
8 Let the paper naturally fold along the creases to form the shape of 9.
9 A basic square is created.

{Enlarge image}
10 Change the top and bottom positions.
With the opening facing downwards, fold the bottom left and right edges to meet the crease in the middle.
11 Make a crease and return.
12 Fold the top at the point where the crease made in 11 intersects with the top left and right edges.
13 Make a crease and return.
14 While opening the front paper upwards, fold the left and right edges inward along the crease made in 11.
15
16
{Flip}
17 Make creases on this side in the same way as 10 and 11.
18 Fold in the same way as 14, 15 and 16 to form 19 and 20.
19
20 The basic fold is complete.

Charizard’s body

1 Fold up to the basic fold shape 20, then change the top and bottom positions. Make the body. Fold the bottom front piece of paper upwards at a point one-third of the way from the bottom tip to the base.
2　
3
4 The body is complete.
{Flip}
5 Make the legs. Fold the top left and right pieces of paper in the middle, offsetting the front and back fold positions, to make shape 6.
6
7 Make the tail. While opening the arrow, fold the front piece of paper in half in a mountain fold and then fold it to the left to make shape 8.
8 Fold the end of the paper over.

9
10 The tail is finished.
11
{Flip}
12
13 Fold along the fold line and gently curve to give it a bow-legged look.
14 The legs are finished. Charizard’s body is finished.

Charizard’s head

1. Fold the right corner to meet the left corner.
2. Mark a point 50mm from the left corner along the bottom diagonal. Since the side length is 150mm, this is one-third of the way there.
3. Fold upwards at the mark made in step 2.
4.
{Flip}
5. Fold the top tip to meet the bottom corner.
6. Open everything up.
7. Fold the edges of the ● section to align with the ○ crease.
8.
{Flip}
9.

10 Make a crease and unfold.
11
{Flip}
12 Fold the bottom left edge at a right angle to the edge in the center.
13
14 Fold the bottom right edge at a right angle to the edge in the center.
15 Hold the ▲ part with your fingers and gently fold it in from both sides to create a basic square.
16
17 A basic square is created. Change the top and bottom position.
18 Make the face.
19 Make a crease and unfold.

20
21 Make a crease and unfold.
22 Fold the left and right corners of the front paper inwards using a reverse fold.
23 Fold the front paper upwards while folding the left and right sides inwards.
24
(Enlarge diagram)
25
26
27
{Flip}
28
29

{Flip}
30 Fold the front right paper twice and then to the left.
31
32 Make a crease and open the right side of the paper to Figure 27.
33 Return the paper that was folded to the left in 30 to the right, and then fold the front left paper twice and then to the right.
34
35 Make a crease and open the left side of the paper to Figure 27.
36 Return the paper that was folded to the right in 33 to the left.
37 First, valley fold along crease A, then mountain fold along B. This will cause C to be folded, resulting in the shape of 38.
38
{Flip}
39

40
41 Place a ruler at the point where the left and right corners of the head meet, and fold the top of the paper downwards. Fold firmly as the paper is thick.
42 Make cuts with scissors from the bottom tip down to the neck.
43
{Flip}
44 Make the horns.
《Enlarge diagram》
45
46
47
《Reduce diagram》
48 The face is complete. Make the arms.
49
{Flip}
50 Fold in half lengthwise, then fold upwards.

51
《Enlarge the diagram》
52 Insert the tip of the paper between the sheets of paper.
53 Fold it in a step.
54 Raise it towards you.
55 Fold the wrist and spread the palm. Fold the other side in the same way.
《Reduce the diagram》
56 Charizard’s head is complete. Insert the body between the sheets of paper in the center and attach it with double-sided tape.
57 Attach the flame at the end of the tail and the wings to 56 with double-sided tape. Charizard is complete.

Flame on the tip of the tail

1 Fold a quarter-sized piece of paper into the basic 20 shape, then change the top and bottom positions.
Fold the bottom front piece of paper up at the base.
2
{Flip}
3 Fold the top left and right pieces of paper down at a slight diagonal, about 12 mm above the base.
4 Fold just 2 mm back.
5
6
7
8
{Flip}
9 The flame is complete. Insert the tip of the tail between the pieces of paper on the bottom left and attach with double-sided tape.

Wings

0 Place two sheets of paper together, with the white backs facing each other, and fold both sheets together. Initially, folding two sheets together is difficult, so try folding one sheet first to understand the process before attempting to fold two sheets together.
1 Fold the bottom corner to meet the top corner.
2 Make a crease and unfold.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease, and unfold.
4 Fold the top and bottom corners to meet the center.
5
{Flip}
6
7
{Flip}
8
9
《Enlarge diagram》
10

11 Fold upwards while opening the arrow.
12
13
14
15
16
{Flip}
17
18
19
{Flip}
20 Hold the triangle and gently pull to the left and right to open the center.
21
22 Fold into the shape shown the step 23.

23 Separate the top and bottom halves. Use only one half.
24 Fold the top slanted edge by about 3 mm.
25
{Flip}
26
27
28
29
30
{Flip}
31 Gently spread them out to the left and right.
32 The wings are complete.