0071 ウツボット〔ポケモン折り紙〕ウツボットの作り方/みるかなた

Basic Folding

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to meet the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold it gently from both sides.
8 Let it naturally fold along the creases to form the shape of 9.
9

Victreebel’s body

{Enlarge image}
1 Fold to the 9th basic fold and change the top and bottom positions.
Fold 20mm from the center crease.
2
3
{Flip}
4 Fold in the same position as the back side.
5 Add a crease and return. Do the same for the back side.
6 Fold the left and right corners to match the creases made in 5.
7
8 While opening the front paper upwards, fold the mountain on the right side along the crease made in 14 and fold it inwards.
This will create a rectangle, but to ensure the independence and freedom of the paper in between, add the next step in 9.
9 Fold the paper folded inwards in 8 back along the crease made in 7, and lower the front paper that was opened up.

10
11 Fold the left mountain in the same way as 8, 9, and 10.
12
{Flip}
13 Fold the left and right corners along the creases made in 5.
14
15 Fold up along the line connecting the bottom ends of the creases on the left and right.
16
17 Fold up from the bottom halfway.
18

19 Fold upwards at the width you just folded in 18.
20 Fold upwards at half the width.
21 Fold the left and right peaks inward as you did with the back side.
22
23 Switch the top and bottom positions.
Fold the top left and right pieces of paper in half at the base and fold them downwards.
24 Fold the left and right pieces of paper you just folded diagonally between the front and back pieces of paper.
25
{Flip}
26 Fold downwards 18 mm below the top apex.
27

28
29
30
{Flip}
31
32 The body of the Victreebel’s body is complete.

The leaf and vines of the Victreebel

1 Fold the bottom corner to meet the top corner.
2 Make a crease and turn it back.
3 Fold the top and bottom right edges to meet the crease in the center.
4
5
(Enlarge image)
6
{Flip}
7 While depressing the ● with the thumb of your left hand, pinch the ▲ with the fingers of your right hand and fold it into the shape of 9.
AB approx. 100mm, BC approx. 48mm, CD approx. 60mm
8

9 Make the leaf above the head.
While opening the ⇒, fold the front piece of paper to the right 50mm from the left, then fold the left piece of paper up to form the shape of a 10.
10 Open the ⇒ and bend the top piece of paper towards you.
11
12
13 Open the paper to the position 25mm from the right.
14
15 The leaf and vines of the Victreebel are finished.
16 Attach the Victreebel’s body to the base of the leaf with double-sided tape.
The Victreebel is finished.