0127 カイロス〔ポケモン折り紙〕カイロスの作り方/みるかなた

Basic Folding

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to line up with the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold gently from both sides together.
8 Let the paper naturally fold along the creases to form the shape of 9.
9 A basic square is created.

{Enlarge image}
10 Change the top and bottom positions.
With the opening facing downwards, fold the bottom left and right edges to meet the crease in the middle.
11 Make a crease and return.
12 Fold the top at the point where the crease made in 11 intersects with the top left and right edges.
13 Make a crease and return.
14 While opening the front paper upwards, fold the left and right edges inward along the crease made in 11.
15
16
{Flip}
17 Make creases on this side in the same way as 10 and 11.
18 Fold in the same way as 14, 15 and 16 to form 19 and 20.
19
20 The basic fold is complete.

The body of Pinsir

1. Fold up to the 20th basic fold, then change the top and bottom positions. Create the arms. Fold the top left and right sides of the paper in an inside reverse fold. Fold the left side slightly downwards from the side. Fold the right side straight to the side.
2. Make the legs.
3.
{Flip}
4.
5. Fold at a position about 12 mm from the tip.
6. Fold back by a width of 1 mm.
7. Fold the tip by about 3 mm.
8. The legs are complete.
{Flip}
9. Make the hands. Fold upwards while opening the arrows.
10. Make cuts with scissors and fold into the shape of fingers.
{Enlarge diagram}
11.
12. Kairos’s body is complete.

Pinsir’s head

1. Fold the paper to the shape of the 20th basic fold, then change the top and bottom positions. Make the horns. Make horizontal cuts with scissors on the top left and right pieces of paper, about 10 mm above the base, only on the front piece of paper.
2. Open the top of the paper cut in step 1 and fold it to the back, inserting it between the pieces of paper.
3. Fold the bottom piece of paper upwards at the corner of the mountain at the back.
4.
5.
{Flip}
6. Fold the top left and right pieces of paper downwards at point A, about 10 mm above the base, perpendicular to the outer edge.
7.
8.
9.
10. The horns are now complete. Next, make the belly by folding the bottom piece of paper in a step fold. First, fold it upwards at a position 14 mm below the base.
11. Fold it back with a width of about 3 mm. 12.
Fold it upwards at a position 14 mm below the fold in step 11, and fold it back with a width of about 3 mm. Let’s repeat this one more time.

13. Fold the bottom tip.
{Enlarge diagram}
14.
15.
16.
{Flip}
17.
18. Fold the corner of the mountain by about 2 mm.
19.
20. While holding down ▲ with your finger, shape the mouth.
21. The head of Kairos is complete.
22. Attach the body to the back of Kairos’s head with double-sided tape. Kairos is complete.