0050 ディグダ〔ポケモン折り紙〕ディグダの作り方/みるかなた

Diglett

1 Fold the bottom corner to meet the top corner.
2 Make a crease and return it to its original position.
3 Rotate the paper 90 degrees, fold the other pair of corners together, make a crease and return it to its original position.
{Flip}
4 Rotate the paper 45 degrees and fold the bottom edge to line up with the top edge.
5 Make a crease and return it to its original position.
6 Rotate the paper 90 degrees and fold the other pair of edges together.
7 Hold the crease ▲ made in step 6 with your fingers and fold gently from both sides together.
8 Let the paper naturally fold along the creases to form the shape of 9.
9 A basic square is created.

{Enlarge diagram}
10 Change the vertical position. Align the bottom corner of the front paper with the top corner.
11 Lightly fold the center and make a mark.
12 Fold the left and right corners to the center mark.
13
14
{Flip}
15 Fold to the same position as the back.
16
17 Unfold the paper folded in 15.
18 Fold the front right paper to the left.
19

20
{Flip}
21
22 Fold the front right piece of paper to the left.
23 This side will be the back.
24 Fold upwards at a position 7-8 mm above the bottom edge.
25
{Flip}
26 This side will be the front. Fold upwards at a position 7-8 mm above the bottom edge.
27 Fold the front right piece of paper to the left.
28
29 Return the paper that was folded to the left in step 27 to the right.

30 Fold the front left piece of paper to the right.
31
32 Return the paper that was folded to the right in step 30 to the left.
33 Fold the paper in between the left and right pieces diagonally in a reverse fold. Figure 34 on the right shows the fold position in the middle of the right piece of paper.
34
35
36
37 Diglett is complete.