0124 ルージュラ〔ポケモン折り紙〕ルージュラの作り方/みるかなた

Jynx’s body

1. Fold the bottom corner to meet the top corner.
2. Lightly mark the bottom fold at the halfway point of the left and right sides, and then the quarter of the right side, then open the paper.
{Flip}
3. Fold the bottom right edge to meet the center crease.
4. Fold parallel to the bottom edge from the quarter mark made in step 2.
5. Since the folding distance is long and there is no guide, it is easy to distort, so use a ruler to guide the folding.
6. Rotate 180 degrees and fold as in steps 3, 4, and 5.
7.
8. Rotate 90 degrees. Fold the inner corners to meet the left and right sides.

9. Make a crease and unfold.
10. Insert your finger into the arrow and fold upwards to form the shape of 11.
11. Fold downwards at a position 50 mm from the top.
12. Using a ruler, firmly fold BD, which is about 5 mm to the right of the center A on the top edge, and 20 mm to the right of the bottom fold C on the right edge.
13. Fold back about 3 mm from the crease BD made in 12. Because of the thickness of the paper, use a ruler to fold firmly.
14. Fold the left side in the same way as 12 and 13.
15.
16. Use a ruler to fold.
17. Make a crease.
18. Change the top and bottom positions. Open the top paper.

19.
20. Insert your finger into the arrow and open the paper, then fold the left and right creases flat. Fold the top piece of paper towards you about 5 mm above the crease.
21. Fold the entire top piece of paper downwards to cover it.
22.
{Flip}
23. Fold upwards at a position 30 mm from the bottom. The paper is thick and difficult to fold, so use a ruler to make sure it folds properly.
24. Use a ruler to fold back about 3-5 mm wide.
25. Change the top and bottom positions. Gently press the crease from behind the paper at the top part to open it.
{Enlarge diagram}
26. Jynx’s body is complete.

Jynx’s head

0. Place the cream-colored paper on the outside and the lavender-colored paper on the inside, aligning the white backs of the papers, and fold both together. Initially, folding two sheets together is difficult, so try folding one sheet first to understand the process before attempting to fold two.
1. Fold the bottom corner to meet the top corner.
2. Make a crease and unfold.
3. Rotate the paper 90 degrees, fold the other pair of corners together, make a crease, and unfold.
4. Fold downwards at a position approximately 35 mm below the top.
5. Make a crease and unfold.
{Flip}
6. For the top part only, fold the left and right edges to meet the center crease, make a crease, and unfold.
7.　
{Flip}
8.

9.
10. Make a crease and unfold.
11. While opening the arrow, fold along the crease made in 10 to make the shape of 12.
12. Fold to the back and tuck the tip between the paper.
13. Use a ruler to fold FH. EF10mm GH50mm
14. Use a ruler to fold IL. KL60mm
15. Make a crease and unfold.
16.

17. Lift the front piece of paper upwards.
18. Fold the top of the paper to the outer edge. Fold the bottom as it will naturally be.
19.
20. Make a cut with scissors from the bottom tip to the intersection of the central fold lines.
21.
{Flip}
22. Fold upwards along the lines passing through point M in diagrams 18 and 19, starting from the center point.
23. Make the arms. Fold along the fold lines in the diagram, but the specific steps are in 24 to 28, which will create the shape of the arms in 29.
24.
25. Hold down ▲ with your finger and lift the right piece of paper upwards while opening the arrow.

26.
27.
28. Fold the other side in the same way as 25, 26, and
27. 29.
30.
31.
32.
{Flip}
33.
34.

35.
{Enlarge the diagram}
36. Make cuts with scissors.
37. Shape the fingers. Jynx’s head is complete.
38. Insert the body into Jynx’s head and attach it with double-sided tape. Jynx is complete.